首页 >> 新闻中心 >> 行业新闻

创盈时代阿里巴巴

联系我们创盈时代


猜你喜欢:


四轴冲压机械手

冲压机械手

六轴工业机器人

工业机器人

搬运机器人

搬运机器人


视频案例:


汽车冲压工艺技术的发展趋势

时间:2019-05-29  来源:本文搜集于网络,由冲压机械手厂家创盈时代整理,欢迎转载,转载注明出处  点击:102

现代汽车工业生产的要求促进了冲压工艺不断向柔性化和自动化发展。同时,冲压成形技术正向着高精度、多功能、节能减排、安全可靠及清洁的生产方向发展。
The requirements of modern automobile industry production promote the continuous development of stamping process to flexibility and automation. At the same time, stamping forming technology is moving towards high precision, multi-function, energy saving and emission reduction, safe, reliable and clean production direction.

冲压机械化和自动化的发展趋势
Development trend of stamping mechanization and automation

大量采用卷料、带料,实现卷料开卷、校平、剪切或落料、堆垛;车身大型覆盖件生产线采用机械化或自动化生产,工序间配置冲压机械手和搬运机器人、机械手或横杆式传输装置;采用级进模生产中小冲压件;选用多工位压力机等。

A large number of coils, materials, the realization of coil unwinding, leveling, shearing or blanking, stacking, body large covering parts production line using mechanized or automated production, inter-process configuration of stamping manipulator and handling robot, manipulator or crossbar transmission device, the use of progressive mold production of small and medium-sized stamping parts, the selection of multi-station press and so on.


冲压机械手


汽车冲压工艺技术向机械化和自动化发展的主要特征主要表现在以下两个方面
The main characteristics of the development of automobile stamping technology to mechanization and automation are mainly manifested in the following two aspects

固定在单机和生产线上的零件品种少,生产批量大,是实现机械化和自动化的重要条件,生产纲领越大,固定的零件品种越少,机械化和自动化辅具越少,更换品种的辅助时间越少,设备开动率越高。
The number of parts fixed in single machine and production line is small, the production batch is large, is the important condition to realize mechanization and automation, the larger the production program, the smaller the fixed part variety, the less mechanized and automatic auxiliary, the less the auxiliary time of the replacement variety, the higher the equipment start-up rate.

冲压件工艺性好是实现机械化和自动化的有利条件,多数大量生产的车身覆盖件,形状趋于简化、拉深深度趋于浅拉深、从而简化工艺流程,减少自动化难度。大型自动化冲压生产线与大型多工位压力机是当今大型冲压装备自动化技术发展的两大趋势。
Stamping parts process is good is to achieve mechanization and automation of the favorable conditions, most of the mass production of body cover parts, the shape tends to simplify, the drawing depth tends to be shallow, thus simplifying the process flow, reducing the difficulty of automation. Large-scale automatic stamping line and large multi-station press are two major trends in the development of large-scale stamping equipment automation technology today.

深圳市创盈时代科技有限公司是一家专注于冲床机械手,上下料机械手,五金冲压机械手,工业机器人,非标自动化设备的研发生产和销售于一体的国家高新技术厂家。

原文地址:http://www.chytime-robot.com/hyxw/513.html

本文关键词:汽车冲压技术 机械手

Copyright @ 2016 版权所有:深圳市创盈时代科技有限公司 粤ICP备13087279号-3
联系人:汪小姐  电话:0755-81779389 400-0733-598  手机:18819037886
地址:深圳市宝安区沙井街道沙头工业区裕民路22号二楼西面 网址:http://www.chytime-robot.com
主营产品:五轴冲床机械手  四轴冲压机械手  机床上下料机械手  工业机器人  六轴关节机器人  网站地图  XML