首页 >> 新闻中心 >> 技术支持

创盈时代阿里巴巴

联系我们创盈时代


猜你喜欢:


四轴冲压机械手

冲压机械手

六轴工业机器人

工业机器人

搬运机器人

搬运机器人


视频案例:


什么是冲压机械手的控制系统

时间:2017-08-21  来源:本文转载于网络,由冲压机械手厂家创盈时代整理,欢迎转载,转载请注明出处  点击:240

冲压机械手厂家冲压生产采用单冲模具生产时,通常是一人操作一台机器。普通冲床的运行效率是每分钟30-50次,当然不同产品冲压时,生产频率与模具设计及操作人员的动作有关系。
The stamping machine manufacturer adopts a single punch, usually one person to operate a machine. The efficiency of ordinary punching machine is 30 to 50 times per minute. Of course, the production frequency is related to the design of the mould and the operation of the operator. 
 
首先,员工需要将材料或半成品送到模具内,然后双手按启动开关,冲床冲压,最后员工取走冲压好的产品,再放上需要冲压的产品。随着人力成本的不断提高,大家开始采用自动冲压机械手代替人工进行自动冲压生产。
First, the employee needs to send the material or semi-finished products to the mould, then press the start switch and press the stamping. Finally, the employee will take the stamping products and put the products in need of stamping. With the continuous improvement of human cost, automatic stamping robot is used instead of automatic stamping production. 

 

自动冲压机械手


冲压机械手采用伺服系统驱动,机械手臂左右运动,步进机构驱动机械手上下运动,整个系统在PLC系统中央控制下,与冲床联机实现自动化冲压。不同冲床、不同模具及不同冲压工艺,冲压自动化设备方案也有不同,自动生产效率也不同,一般每分钟自动冲压效率为15-25次。相对人员操作时的单个效率,冲压机械手好像并无效率的优势。
Stamping manipulator adopts servo drive, mechanical arm movement, stepping driving manipulator moves up and down, the whole system in the middle of the PLC system control, and online automatic stamping press. Different punching machines, different moulds and different stamping processes, the stamping automation equipment scheme is different, and the automatic production efficiency is different, and the automatic stamping efficiency is 15 to 25 times per minute. The stamping manipulator seems to have no efficiency advantage when compared with the individual efficiency of the operation. 
 
以一天八小时计算,因为冲压机械手不会疲劳、没有情绪,所以可以连续生产,而人力因为身体、感情等因素,很难持续保持相同的效率连续工作。另外,冲压机械手自动生产时,避免了人员操作时造成工伤事故的潜在风险。综合下来,使用冲压机械手的效率远远高于人工上下料。
For eight hours a day, because no fatigue, no emotion, stamping manipulator so can continuous production, and factors such as human as the body, feelings, it is difficult to keep the efficiency of the same work continuously. In addition, the stamping manipulator automatically produces, avoiding the potential risk of injury accidents caused by personnel operation. In combination, the efficiency of using the stamping manipulator is much higher than that of the artificial. 

深圳市创盈时代科技有限公司是一家专注于冲床机械手,上下料机械手,冲压机械手,工业机器人,非标自动化设备的研发生产和销售于一体的国家高新技术厂家。

本文地址:http://www.chytime-robot.com/jszc/370.html

本文关键词:冲压机械手


Copyright @ 2016 版权所有:深圳市创盈时代科技有限公司 粤ICP备13087279号-3
联系人:汪小姐  电话:0755-81779389 400-0733-598  手机:18819037886
地址:深圳市沙井沙一社区万安路长兴科技园16栋2楼 网址:http://www.chytime-robot.com
主营产品:五轴冲床机械手  四轴冲压机械手  机床上下料机械手  工业机器人  六轴关节机器人  网站地图  XML