首页 >> 新闻中心 >> 技术支持

创盈时代阿里巴巴

联系我们创盈时代


猜你喜欢:


四轴冲压机械手

冲压机械手

六轴工业机器人

工业机器人

搬运机器人

搬运机器人


视频案例:


数控车床上下料机械手使用四点注意事项

时间:2017-11-09  来源:本文转载于网络,由数控机床上下料机械手厂家创盈时代整理,欢迎转载,转载请注明出处  点击:258

数控车床上下料机械手是针对不同的机床结构进行个性化的改造。然后根据加工产品不同,快速地对夹持系统和控制程序进行调整,实现生产柔性化。把机床设备和机械手共同构成一个柔性加工系统或柔性制造单元,数控车床上下料机械手属精密设备,所以在使用时要注意其使用规则,切勿违规操作。不宜随意拆卸,以防止附件安装错误,影响其工作效率或造成危险。此外,设备使用前需要对在岗员工进行专业培训方可上岗。那么在实际使用中应该注意哪些呢?
CNC lathe feeding manipulator is for different machine tool structure for personalized transformation. Then, according to the different processing products, the clamping system and the control program are adjusted quickly to realize the flexibility of production. The machine tool equipment and manipulator is composed of a flexible manufacturing system and flexible manufacturing unit, CNC lathe manipulator is a precision equipment, so pay attention when using the rules of use, not illegal operation. Should not be dismantled at random, to prevent attachment installation errors, affecting their work efficiency or dangerous. In addition, before the use of equipment, professional training should be carried out on the post staff. So what should we pay attention to in the actual use?

夹紧力勿过大


由于数控车床上下料机械手多采用全自动设计,但是在使用时要注意根据物料类型的不同,选择适当的夹紧力,不可将加紧力设置过大。否则可能会使部分加工材料损坏,尤其会对棒料表面造成损坏。

Since the CNC lathe feeding and unloading manipulator more fully automatic design, but in use, we should pay attention to the choice of the appropriate clamping force according to the type of material, can not be too large to set up the force. Otherwise, parts of the material may be damaged, especially damage to the surface of the bar.


数控车床上下料机械手


开闭范围勿过小


一般数控车床上下料机械手开闭范围适中即可,但若在空间环境允许的条件下,可尽量使开闭范围增加。尤其是拿取体积较大的物料时,最好可以提前对开辟范围等进行调整,使其精度更高。
In general, the opening and closing range of the lathe manipulator can be moderate, but it can increase the opening and closing range as much as possible under the condition of the space environment. Especially when taking larger volume materials, it is better to adjust the opening range ahead of time so as to make it more accurate.

速度勿过快


在使用数控车床上下料机械手时,应以其运行稳定性为基本的前提。如果抓取的物体体积较大,或者因其它因素如运行速度过快使设备的整体稳定性下降,这样可能会使机械手臂发生震动,降低其抓取的精度。
In the use of CNC lathe unloading manipulator, should be based on the stability of its basic premise. If the object size is large, or because of other factors such as running speed is too fast, so that the overall stability of the device will decline, which may make the mechanical arm vibration, reduce the accuracy of its grasp.

滑动不顺应停机


数控车床上下料机械手工作的环境较为复杂,而且一些物料的体积较小,易进入设备当中影响设备运行。所以如果上下料机械手出现滑动不顺或者有明显的异常声响,此时应立即停机检查,防止对其进一步造成破坏。
CNC lathe feeding manipulator working environment is more complex, and some small volume of materials, easy access to equipment, affecting the operation of equipment. Therefore, if the feeding and unloading manipulator is slipping or has obvious abnormal sound, the machine should be checked immediately to prevent further damage.

以上四点是数控车床机械手在使用时的注意事项,深圳市创盈时代科技有限公司是一家专注于冲床机械手,数控机床上下料机械手,冲压机械手,工业机器人,非标自动化设备的研发生产和销售于一体的国家高新技术厂家。

原文地址:http://www.chytime-robot.com/jszc/396.html

本文关键词:数控车床上下料机械手

Copyright @ 2016 版权所有:深圳市创盈时代科技有限公司 粤ICP备13087279号-3
联系人:汪小姐  电话:0755-81779389 400-0733-598  手机:18819037886
地址:深圳市沙井沙一社区万安路长兴科技园16栋2楼 网址:http://www.chytime-robot.com
主营产品:五轴冲床机械手  四轴冲压机械手  机床上下料机械手  工业机器人  六轴关节机器人  网站地图  XML