首页 >> 新闻中心 >> 技术支持

创盈时代阿里巴巴

联系我们创盈时代


猜你喜欢:


四轴冲压机械手

冲压机械手

六轴工业机器人

工业机器人

搬运机器人

搬运机器人


视频案例:


冲压机械手运行时要注意哪些问题

时间:2018-05-10  来源:本文搜集于网络,由五金冲压机械手厂家创盈时代整理,欢迎转载,转载注明出处  点击:77

冲压机械手称直轨、滑轨、线性滑轨,用于直线往复运动场合,拥有比直线轴承更高的额定负载, 同时可以承担一定的扭矩,可在高负载的情况下实现高精度的直线运动,但是冲压机械手运行时要注意哪些问题呢?
Punching manipulator called straight rail, slide rail, linear slide rail, used in linear reciprocating movement, has higher rated load than straight line bearing, and can bear certain torque at the same time, can realize high precision straight line motion in high load condition, but what problems should be paid attention to when stamping manipulator operation?

一、冲压机械手在使用安装时要认真仔细,不允许强力冲压,用锤直接敲击导轨,通过滚动体传递压力,否则会引起冲压机械手内部或其表面损坏,影响其精度。

First, the stamping manipulator should be careful and careful in the use of the installation. It does not allow the strong punching, hammers directly on the guide rail and passes the pressure through the rolling body. Otherwise, it will cause the internal or surface damage of the stamping manipulator and affect its precision.


冲压机械手


二、防止锈蚀,直接用手拿取冲压机械手时,要充分洗去手上的汗液,并涂以优质矿物油后再进行操作,特别是在雨季和夏季尤其要注意这一点。
Two, to prevent rust, when the hand is taken directly by hand, wash the sweat from the hand fully, and then apply it with high quality mineral oil, especially in the rainy season and summer.

三、保持冲压机械手及其周围环境的清洁,即使是肉眼看不见的微小灰尘进入导轨,也会增加导轨的磨损,振动和噪声,因此必须保持环境清洁。
Three, keep the cleaning of the stamping manipulator and its surrounding environment, even if the tiny dust invisible to the naked eye enters the guide rail, it will also increase the wear, vibration and noise of the guideway, so it is necessary to keep the environment clean.

四、冲压机械手要使用合适、准确的安装工具尽量使用专用工具,极力避免使用布类和短纤维之类的东西,防止细小碎屑进入冲压机械手而影响冲压机械手的性能。
Four, the stamping manipulator should use the appropriate and accurate installation tools to use special tools as far as possible to avoid the use of cloth and short fiber and other things, to prevent small debris into the punching manipulator and affect the performance of the stamping manipulator.

深圳市创盈时代科技有限公司是一家专注于冲床机械手,上下料机械手,冲压机械手,工业机器人,非标自动化设备的研发生产和销售于一体的国家高新技术厂家。

原文地址:http://www.chytime-robot.com/jszc/446.html

本文关键词:冲压机械手

Copyright @ 2016 版权所有:深圳市创盈时代科技有限公司 粤ICP备13087279号-3
联系人:汪小姐  电话:0755-81779389 400-0733-598  手机:18819037886
地址:深圳市沙井沙一社区万安路长兴科技园16栋2楼 网址:http://www.chytime-robot.com
主营产品:五轴冲床机械手  四轴冲压机械手  机床上下料机械手  工业机器人  六轴关节机器人  网站地图  XML