首页 >> 新闻中心 >> 技术支持

创盈时代阿里巴巴

联系我们创盈时代


猜你喜欢:


四轴冲压机械手

冲压机械手

六轴工业机器人

工业机器人

搬运机器人

搬运机器人


视频案例:


注塑冲床机械手在应用前的检测与调整

时间:2018-07-26  来源:本文搜集于网络,由冲床机械手厂家创盈时代整理,欢迎转载,转载注明出处  点击:42

近年来随着很多企业响应智能制造工程的逐步落实,冲床机械手在市面上的应用越来越多,范围也越来越广,那么在实际使用冲床机械手的时候,我们要进行怎样的检测与调整呢?
In recent years, with the gradual implementation of many enterprises in response to intelligent manufacturing engineering, the application of the punch manipulator in the market is more and more, and the scope is becoming more and more wide. So, when in actual use of the punch manipulator, what kind of detection and adjustment do we have to carry out?

就拿注塑机来说,注塑机与冲床机械手的接口是一种握手协议,是协调注塑机与机械手的顺序动作。接口定义了机械安装方式以及电气协议。注塑机与机械手的接口接好后,在使用冲床机械手前必需做以下的检测与调整。

Take the injection molding machine, the interface between the injection molding machine and the punch manipulator is a handshake agreement, which coordinates the sequential action between the injection molding machine and the manipulator. The interface defines mechanical installation and electrical protocols. After the interface between the injection molding machine and the manipulator is connected, the following checks and adjustments must be made before using the punch manipulator.


注塑冲床机械手


1,开启连接注塑机信号,检查注塑机是否能开合模顶针抽芯动作,应该不能动作。关闭此信号,注塑机应该能自由动作。
Open the signal connected to the injection molding machine, check whether the injection molding machine can open and close the ejector pin core pulling action, it should not be able to move. If the signal is turned off, the injection molding machine should be able to move freely.

2,手动模式下,把冲床机械手运动到模具区域,看能否做合模动作,应该不能合模。不使能开合模,看注塑机能否开合模,应该不能开合模。同样方式检查顶针和抽芯。
In manual mode, press the punch manipulator to the mold area to see if it can do the clamping action. If the mold can not be opened and closed, whether the injection molding machine can be opened or closed, the die should not be opened or closed. The same way to check the thimble and core.

3,机械手使能开合模,看注塑机能否开合模,当开合模完成后,看机械手界面是否泛起开合模完成。同样方式检查顶针和抽芯。将冲床机械手置于手动模式并将注塑机安全门打开,此时应泛起“安全门开”信号,不能做任何动作,将安全门关上后此信息应消失。
The manipulator can open and close the mold to see whether the injection molding machine can open and close the die. When the opening and closing die is completed, whether the interface of the manipulator is open or not is completed. The same way to check the thimble and core. The punch manipulator is placed in manual mode and the injection machine safety door is opened. At this time, the "safe door opening" signal should be flown and no action is done. The information should be disappearing after the safety door is closed.

以上就是关于注塑冲床机械手在应用前的检测与调整应该注意的相关事宜,只要大家按照要求去检测和调试,基本上不会出现设备故障的情况。
The above is about the injection punch press before the application of the testing and adjustment of the relevant matters should be paid attention to, as long as people according to the requirements to test and debug, basically no equipment failure.

深圳市创盈时代科技有限公司是一家专注于冲床机械手,上下料机械手,冲压机械手,工业机器人,非标自动化设备的研发生产和销售于一体的国家高新技术厂家。

原文地址:http://www.chytime-robot.com/jszc/462.html

本文关键词:注塑冲床机械手检测调整

Copyright @ 2016 版权所有:深圳市创盈时代科技有限公司 粤ICP备13087279号-3
联系人:汪小姐  电话:0755-81779389 400-0733-598  手机:18819037886
地址:深圳市沙井沙一社区万安路长兴科技园16栋2楼 网址:http://www.chytime-robot.com
主营产品:五轴冲床机械手  四轴冲压机械手  机床上下料机械手  工业机器人  六轴关节机器人  网站地图  XML